Ex Demo KRG Bravo Chassis for Ruger 10/22 Red

The item pictured may not be the exact item available as we may have more than one in stock under this product code. If you would like more information and/or pictures of what is available, please contact the stocking store.

Introducing the 10/22 Bravo Chassis. Designed to fit your favorite Ruger 10/22 for that dream build you’ve always wanted. Featuring the same great ergos as the standard KRG Bravo but with a slightly shorter minimal LOP (~11") for shooters of all sizes. For those of you over thinkers out there, don’t worry, the cheek piece position is still the same as the standard Bravo.

The Bravo is one of the most comfortable stocks available but that's just the beginning.The full length stiff aluminum backbone will not allow the forend to flex on you but does allow design modularity with loads of accessories.

The ergonomic adjustments on the 10/22 Bravo Chassis are just what you need to fit your frame so you can pull off the difficult shots. Comes standard with tool-less cheek height and a spacer LOP system.

• Compatible with factory Ruger 10/22
• Not compatible with Bergara BXR, take-down models, or receivers with a rear tang that has a bottom mounting action screw (ex: Ruger 10/22 Competition)
• Utilizes factory 10/22 mags
• Does not ship with QD cups

Features

Bravo 10/22 Chassis Forend:

• Polymer for light weight and to eliminate heat transfer to/from the shooter's hand
• Mounting holes at various positions will take L2 Picatinny rails, Barrier stop, ARCA Rail, etc
• Mlok slots in sides and bottom of forend for universal accessories mounting

“Backbone”:

• Full length aluminum backbone from the action to the tip of the forend
• Accepts the Whiskey-3 gen 3+ Spigot Mount, but current Spigot mounts will not fit the 10/22 with a bull barrel
• Will accept barrel contours up to .920" in diameter

Cheekpiece:

• Infinitely adjustable within range (~1” travel)
• Can be quickly removed and re-installed, uses a clamp and thumbscrew design
• Made of polymer to limit heat transfer to or away from your face

Length of Pull (LOP):

• Ships standard .75" LOP spacer
• Standard 3/8" LOP spacers can be added (available separately) for longer a LOP

Buttstock:

• Very strong reinforced polymer material
• Mounting points for external QD cup
• Built in thumbshelf for same-side-thumb-grip shooters
• Can be configured with a continuous angled lower surface or a "butthook" configuration
• Current Bravo Tool-less LOP will not fit 10/22 Bravo due to shorter stock

Recoil Pad:

• KRG designed injection molded pad that is thin for short LOP. Standard logo'd KRG buttpad is also compatible

Mounting features for slings, monopods, etc:

• Forend has M-LOK slots on each side and bottom along with other holes for mounting accessories
• Buttstock has one position on each side for external QD cup
• Buttstock includes angled cover with the "Butthook" cover sold separately
• Harris bipod stud included on forend
• Ambi QD sling plate can be mounted and provides 3 positions for QD sling

Materials/Finishes:

•  Aluminum parts are hard anodized (Type III)
• Nearly all fasteners are stainless steel, some with black oxide coating, some are without
• Steel parts are salt bath nitrided or stainless steel
• Forend and buttstock are injection molded reinforced polymer

Weight: 2.4 lbs w/o magazine

Colours: red

Gun City is NZ's largest firearms dealer. We have been selling, importing, exporting, manufacturing, customising and repairing firearms & accessories since 1978. We have the largest range of guns, ammo & accessories available now, online in New Zealand. 

Please call our shop for more information on +64 3 379-8888 in Christchurch, New Zealand.